|
|
|
|
|
- Press [ ] or [ ] to select <IP ADDRESS>, <SUBNET MASK>, or <GATEWAY ADDRESS>, then press [OK].
If the machine is communicating with the network properly, the IP address, subnet mask and gateway address are displayed.
If not, they are not displayed.
If the machine does not obtain the IP address 30 seconds after you connect the LAN cable, turn OFF the main power switch, and then turn it ON again and wait for another 90 seconds. If the machine still does not obtain an IP address, ask your network administrator.
- We recommend you to take note of the IP address you confirmed here. You will need it for "Using the Remote UI."
|