LASER CLASS 810/830i Reference Guide

Machine Components

	A	ADF (Automatic Document Feeder) Holds documents and feeds them automatically into the scanning area.
	B	Slide guides Adjust to the width of the document.
	C	Document feeder tray Holds documents.
	D	Document delivery tray Receives documents.
	E	Paper delivery tray Receives copies, prints and faxes.
	F	Paper stopper Prevents the paper from falling off the paper delivery tray. Open the stopper from its original position for A4/LTR size paper. For LGL size paper, pull out the extension first, and then open the stopper.
	G	Operation panel Machine controls.
	H	Paper cassette Holds the paper supply.
	I	Stacking support Helps prevent paper curl on the output tray. Open as far as it goes when using curl-prone paper.

	J	Left cover Open this cover when replacing the toner cartridge or clearing paper jams.
	K	Scanning area Scans documents from the ADF.
	L	Multi-purpose tray Feeds non-standard size or thick/thin type paper stacks.
	M	Slide guides for multi-purpose tray Adjusts to the width of the paper.
	N	Multi-purpose tray extension Pull out to load paper stack.

	O	USB port Connect the USB (Universal Serial Bus) cable.
	P	Ethernet port Connect the network cable. For the LASER CLASS 810, the machine is equipped with an Ethernet port if an optional printer kit is attached.
	Q	Telephone line jack Connect the external telephone cable.
	R	External device jack Connect an external device.
	S	Handset jack Connect an optional handset cable.
	T	Power socket Connect the power cord.
	U	Main power switch Turns the power on or off.