Use a screwdriver to remove the cover on the right side of the machine.
Attach the screws included with the machine to the center screw holes, and attach the driver instruction label below.
Screw the handset cradle onto the bracket with the screws (A). Make sure the groove (B) side of the cradle faces to the left.
Screw the bracket onto the machine with the screws (A).
Place the handset on the cradle.
If using the handset or an external telephone, make sure to set the fax receive mode to <FaxTel> or <Manual>. For how to set the receive mode, see Set the Machine for Receiving Faxes."
Connect the curly cord terminal to the back of the modular terminal.
Connect the power cord into the wall outlet, and turn the power on.
Confirm that you can hear a dial tone from the handset.