Troubleshooting
> If a Message Such as <Paper diff. from set size/type.> is displayed
If a Message Such as <Paper diff. from set size/type.> is displayed |
If all of the following do not match, a message such as <Paper diff. from set size/type.> is displayed:
If such a message is displayed and you are unable to make a copy or print job, change the paper size in the items described above so that they all match. See the following chart for details concerning the messages and remedies. |
|
Message | Cause | Remedy |
Copy | ||
Load LTR to Drawer 1. (Depending on the paper supply and settings, the message displayed may vary.) |
The following did not match:
|
Change the following so that they match:
|
Paper diff. from set size/type. | ||
Remove the jammed paper from inside the front cover. | The following did not match:
|
Follow the procedure below: 1. Change the following so that they match:
3. Wait for the machine to automatically resume the job. (See "Loading Paper" or "Setting Paper Size and Type.") |
Load LTR to Drawer 1. (Depending on the paper supply and settings, the message displayed may vary.) |
The following did not match:
|
To print on the paper of the size specified on the machine's paper settings and on the printer driver: Load the paper of the size specified on the machine and on the printer driver and close the paper drawer. Printing will resume. |
To print on the paper of the size that is loaded in the paper drawer: 1. Delete the current job. 2. Change the paper size settings both on the printer driver and on the machine. 3. Retry printing. |
||
Load paper. | The following did not match when printing:
|
Change the following so that they match, and then retry printing (When you change the paper size setting on the printer driver, cancel the job on the machine.):
|
Paper diff. from set size/type. | The following did not match:
|
Change the following so that they match, and then retry printing:
|
If the massage <Paper different from set size/type> appears after you have selected <Recover Later> to the message <Remove the jammed paper from inside the front cover.>: 1. Change the following so that they match:
(See "Inside of the Machine.") |
||
Remove the jammed paper from inside the front cover. | A paper jam occurred because the size of the paper loaded in the paper drawer was different from that of the paper specified on the machine and printer driver. | Follow the procedure below (the procedure is the same when the massage <Paper different from set size/type> appears after you have selected <Recover Later>). 1. Change the following so that they match:
|