Full Correction |
This is a precise recalibration for the machine's gradation, density, and color settings. The procedure involves making test prints and placing them on the platen glass for scanning. Once this is complete, the machine automatically corrects the irregularities. |
Remark |
|
|
|||||
|
|
|
|
|
If you set <Color> in <Paper Type> of <Paper Settings>, an error message will appear. If this is the case, follow the instructions below. 1. Press the right Any key to select <Done> and return to the screen in step 5. 2. Load LTR or A4 plain paper into the stack bypass tray and set the paper size and type. 3. Use [], [] or (Scroll Wheel) to select <Full Correction>.
|
Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. |
|
If you set <Color> in <Paper Type> of <Paper Settings>, an error message will appear. If this is the case, follow the instructions below. 1. Press the right Any key to select <Done> and return to the screen in step 5. 2. Load LTR or A4 plain paper into the stack bypass tray and set the paper size and type. 3. Use [], [] or (Scroll Wheel) to select <Full Correction>. |
Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. |
|
|