|
- If the memory becomes full during scanning the document to be sent, the TX Report is not printed regardless of the setting.
- When a sequential broadcast transmission was performed, a Multiple Communication Result Report is printed instead of a TX Report.
- When a PC-Fax transmission was performed, a part of the sent document is not printed even if you set
<Display Send Original> to <On>.
|
|
|
|
- For a Multiple Communication Result Report, the following items are displayed.
- TX/RX NO: Transaction number
- PGS.: The number of pages that were sent successfully
- DEPT. ID: If Department ID Management is set, the Department ID is printed.
- TX/RX INCOMPLETE: If a transmission is incomplete, the address and name of the destination are printed. If there is no applicable destination, "_ _ _ _ _" is printed.
- TRANSACTION OK: The address and name of the destination of a completed transmission are printed. If there is no applicable destination, "_ _ _ _ _" is printed.
- ERROR INFORMATION: If an error in transmission occurs, the address and name of the destination are printed. If there is no error, "_ _ _ _ _" is printed.
|
|