|
- Use [], [] or (Scroll Wheel) to select <Initial Function Settings>, then press [OK].
- If you want to change the initial function screen:
- 1. Use [], [] or (Scroll Wheel) to select <Select Initial Function>, then press [OK].
- 2. Use [], [] or (Scroll Wheel) to select the initial function, then press [OK].
- <Main Menu>: Displays the main menu screen.
- <Copy>: Displays the Copy top screen.
- <Send/Fax>*1: Displays the Send type selection screen.
- <Scan to Store>: Displays the Store type selection screen.
- <Direct Print>*2: Displays the Direct Print screen.
*1 <Send/Fax> is displayed for the Color imageRUNNER C1030iF, or C1030 with the optional Super G3 FAX Board attached. <Scan to Send> is displayed for the Color imageRUNNER C1030 with the optional Super G3 FAX Board not attached.
*2 <Direct Print> is displayed only if <Direct Print> in <Memory Media Settings> is set to <On>. (See "Restricting Printing Images from a USB Memory.")
- If you want to set the Status Monitor screen as the initial function screen:
- 1. Use [], [] or (Scroll Wheel) to select <Set Status Monitor to Def.>, then press [OK].
- 2. Use [], [] or (Scroll Wheel) to select <On> or <Off>, then press [OK].
- If you want to set the default Status Monitor screen to Device Info.:
- 1. Use [], [] or (Scroll Wheel) to select <Status Monitor Device>, then press [OK].
- 2. Use [], [] or (Scroll Wheel) to select <On> or <Off>, then press [OK].
|