|
- Use [], [] or (Scroll Wheel) to select <Incoming Ring>, <Entry Tone>, <Error Tone>, <TX Done Tone>, <Receive Done Tone>, <Print Done Tone> or <Scan Done Tone>, then press [OK].
- <Incoming Ring>: Set whether the telephone rings when it receives a voice call, enabling you to answer the call. This function is only available when the <Reception Mode Selection> is set to <Auto RX>.
- <Entry Tone>: Adjust the tone that beeps when pressing keys on the control panel.
- <Error Tone>: Adjust the tone that beeps when an error (e.g., paper jam) occurs.
- <TX Done Tone>: Adjust the tone that beeps when a document is sent.
- <Receive Done Tone>: Adjust the tone that beeps when receiving document is complete.
- <Print Done Tone>: Adjust the tone that beeps when printing is complete.
- <Scan Done Tone>: Adjust the tone that beeps when scanning is complete.
|