|
1 |
Feeder
Originals placed in the Feeder are automatically fed sheet by sheet to the scanning area. The feeder also automatically turns over two-sided originals to make one- or two-sided copies. |
|
2 |
Slide Guides
Adjust the slide guides to match the width of the originals. |
|
3 |
Original Supply Tray
Originals placed here are automatically fed sheet by sheet to the scanning area of the platen glass. Place originals into this tray with the surface that you want to scan face up. |
|
4 |
Original Output Tray
Originals that have been scanned from the original supply tray are output to the original output tray in the order that they are fed into the feeder. |
|
5 |
Original Stopper
Prevents the originals from falling off the paper delivery tray.
Open the stopper from its original position for LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper. |
|
6 |
Control Panel
Machine controls. |
|
7 |
Optional Card Reader-E1
The Card Reader-E1 enables Department ID
Management to be performed automatically. |
|
8 |
Stack Bypass Tray
Feeds non-standard size or thick/thin type paper stacks. |
|
9 |
Stack Bypass Tray Extension
Pull out to load paper stack. |
|
10 |
Slide Guides for Stack Bypass Tray
Adjusts to the width of the paper. |
|
11 |
Paper Stopper
Prevents the paper from falling off the paper delivery tray.
Open the stopper from its original position for LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper. |
|
12 |
Paper Delivery Tray
Copies, prints and faxes are output to the paper delivery tray. |