|
- Enter the each erase width value:
- If you want to specify the erase width value for center:
- 1. Use [], [] or (Scroll Wheel) to select <Center>, then press [OK].
- To enter values in millimeters, press the left Any key to select <Enter mm>.
- 2. Use [], [] or (Scroll Wheel) to enter a frame erase width value, then press [OK].
- The default setting is <3/8" (10 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.
- When entering the value in millimeters, you can also use [], [], (Scroll Wheel), or - (numeric keys).
- If you want to change the value, press (Clear) before entering the new value.
- If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
- If you want to specify the erase width value for all sides:
- 1. Use [], [] or (Scroll Wheel) to select <All Sides>, then press [OK].
- 2. Use [], [] or (Scroll Wheel) to enter a frame erase width value, then press [OK].
- The default setting is <3/16" (6 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.
|