|
- Use [], [] or (Scroll Wheel) to select the original size, then press [OK].
- To switch to the A/B Sizes, press the left Any key to select <A/B Sizes>.
- If you want to set the same width for all four borders:
- 1. Use [], [] or (Scroll Wheel) to enter a frame erase width value, then press [OK].
- The default setting is <3/16" (6 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.
- To enter values in millimeters, press the left Any key to select <Enter mm>. When entering the value in millimeters, you can also use [], [], (Scroll Wheel), and - (numeric keys).
- If you want to change the value, press (Clear) before entering the new value.
- If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
- If you want to set the top, left, right, and bottom widths independently:
- 1. Press the right Any key to select <Adj. Each Dim.>.
- 2. Use [], [] or (Scroll Wheel) to select the desired frame erase borders, then press [OK].
- To enter values in millimeters, press the left Any key to select <Enter mm>. When entering the value in millimeters, you can also use [], [], (Scroll Wheel), and - (numeric keys).
- 3. Use[], [] or (Scroll Wheel) to enter a frame erase width value, then press [OK].
- The default setting is <3/16" (6 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.
- If you want to change the value, press (Clear) before entering the new value.
- If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
- 4. Use [], [] or (Scroll Wheel) to select <Apply Settings>, then press [OK].
The display will return to the Copy top screen. |