|
- If you want to use the stack bypass tray as a selectable paper source, set <Stack Bypass Paper (Std.)> in <Paper Settings> to <On>. For instructions on how to set <Stack Bypass Paper (Std.)>, see "For the Stack Bypass Tray."
|
|
|
|
- To use Auto Paper Selection (LTR/LGL), the following settings are necessary:
- Both LTR and LGL size paper must be loaded in the paper sources and the correct paper sizes for each paper source must be set in the <Paper Settings> menu (Example: LTR in the paper drawer, LGL in the stack bypass tray). For details about how to load paper, see "Loading Paper." For details about configuring the paper size, see "Setting Paper Size and Type."
- <Auto Drawer Selection> must be set to <On> for the paper source that holds the LTR and LGL size paper. For instructions on how to set Auto Drawer Selection, see "Setting Auto Drawer Selection."
|
|