|
|
|
|
|
- Press (Start) to start copying.
- When scanning is complete, remove your originals.
- You cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio, while the machine is copying.
- If the optional Card Reader-E1 is attached, remove the control card and press (Log In/Out) when the copy is complete. For details, see "Security."
- To cancel all settings and return the machine to the Standard mode, press (Reset).
- If the machine remains idle for more than two minutes, the display returns to the Main Menu screen (Auto Clear Time). You can change the value of time for the Auto Clear Time. For details, see "Setting the Auto Clear Time."
- If you want to make another copy when there is an ongoing job, press the right Any key to select <Done>. Then repeat from the step 1.
|